The Art Of Building A Redwood Table

Hello, my name is John. I am the author and owner of Home Business Ideas And Opportunities. I created this article to give you an idea of a simple way to earn a nice amount of money. Redwood trees only are found in northern California and the wood from them can bring in a pretty penny.

Not only is the wood in limited supply, the grain of the wood from certain parts of the tree is exceptionally pretty making some chunks of the wood spendy. A finished end table made of the part of the Redwood tree known as the curly wood can be sold for several thousand dollars.

That being said, let’s get into the article and I will let you know how you can possibly get your own connection that will supply you with Redwood at a magnificent price.

How to Build a Redwood Table: A Detailed Guide

Building a table from a piece of redwood can be a rewarding and enjoyable project. Redwood is known for its durability, beauty, and resistance to decay, making it an excellent choice for furniture. This guide will walk you through the steps to create your own redwood table.

Materials and Tools Needed

Materials:

• Redwood planks (choose the size based on your desired table dimensions)
• Table legs (can be purchased or made from redwood)
• Wood screws or dowels
• Wood glue
• Sandpaper (various grits)
• Wood stain or finish
• Wood filler (if needed)

Tools:

• Measuring tape
• Circular saw or table saw
• Power drill
• Clamps
• Router (optional, for decorative edges)
• Sander or sanding block
• Paintbrush or rag (for applying stain/finish)
• Safety gear (goggles, gloves, mask)

Step-by-Step Instructions

Step 1: Plan and Measure

1. Decide on the dimensions of your table. Common dimensions for a dining table are 30 inches high, 36 inches wide, and 60 inches long, but you can customize this to fit your space and needs.
2. Measure and mark the redwood planks to the desired length and width using a measuring tape and pencil.

Step 2: Cut the Wood

1. Use a circular saw or table saw to cut the redwood planks to size. Make sure to follow your measurements precisely for a smooth assembly process.
2. If you are making the table legs from redwood, cut the wood to the desired length. Standard table leg height is about 29 inches to allow for a 1-inch thick tabletop.

Step 3: Sand the Wood

1. Begin sanding the cut pieces of wood with coarse-grit sandpaper to remove rough edges and surface imperfections.
2. Progress to finer grits of sandpaper until the wood is smooth to the touch. Pay extra attention to the edges and corners.

Step 4: Assemble the Tabletop

1. Lay out the redwood planks side by side to form the tabletop. Ensure the grain direction is consistent for a cohesive look.
2. Apply wood glue along the edges of the planks and press them together. Use clamps to hold the planks in place while the glue dries, usually for at least 24 hours.
3. For added stability, drill pilot holes and insert wood screws or dowels along the joints.

Step 5: Attach the Table Legs

1. Position the table legs at each corner of the tabletop. Ensure they are evenly spaced and aligned.
2. Drill pilot holes through the tabletop into the legs.
3. Secure the legs to the tabletop with wood screws. If using dowels, apply wood glue to the dowels and insert them into the holes, then clamp the legs in place until the glue dries.

Step 6: Add Finishing Touches

1. Use wood filler to fill any gaps or holes in the table. Allow it to dry, then sand it smooth.
2. If desired, use a router to create decorative edges on the tabletop.
3. Sand the entire table one last time with fine-grit sandpaper to ensure a smooth finish.

Step 7: Apply Stain or Finish

1. Choose a wood stain or finish that enhances the natural beauty of redwood. Apply it using a paintbrush or rag, following the manufacturer’s instructions.
2. Allow the stain or finish to dry completely. Apply additional coats if needed for a richer color or more protection, sanding lightly between coats.

Step 8: Final Assembly and Inspection

1. Check the table for any rough spots or imperfections and sand them smooth.
2. Ensure all screws and joints are secure.
3. Wipe the table with a clean cloth to remove any dust or debris.

Tips and Considerations

• Always wear safety gear when cutting, sanding, or finishing wood.
• Redwood can be expensive, so plan your cuts carefully to avoid waste.
• Consider adding a protective coating to the table if it will be used outdoors.
• Experiment with different stains or finishes on a scrap piece of redwood to see how they affect the wood’s appearance before applying them to the entire table.

Building a redwood table can be a fulfilling project that results in a beautiful and functional piece of furniture. With patience and attention to detail, you can create a table that will last for years and become a centerpiece in your home.

There you have it. That is just one method of building a table from redwood. There are many different ways to use redwood when building tables and shelves. And of course you can use redwood for any wood project you so desire.

As I was saying in the beginning of this article, redwood is not easy to come by and it is a very spectacular looking wood to show off your projects to friends and whatnot. Another great feature of redwood is that it is impervious to bugs and is highly durable as far as rotting goes.

I reside in the heart of the Redwood forest in northern California and have a few good connections that enable me to acquire pieces of redwood that are very exotic and highly graded. If you are interested in starting a conversation about how you can get some redwood for your own projects please email me at digitalincomegenie@gmail.com.

Best Wishes,

John